RT809F verify error. I'm need help.

BenCesur

Thanks Admin.

But same error again.

001:  D:\BILGISAYAR-TAMIR\BIOS\KBC ROM\KB9012\QCLA4 LA-8861P.BIN
002:  File loading OK. Checksum: 16bit_0x91DA,32bit_0x010491DA;
003:  Programming device......
004:  Erase & Write successfully,19.91 seconds elapsed.
005:  Auto verifying...
006:  Device blank checked failure,start address: 0x7DA.
007:  Verified failure,0.108 seconds elapsed.
008:  Write error occurred,Operation was aborted

BenCesur

Admin;

Software nevest version.
Not USB hub. Directly pc connect.
Via 2 different adapters and 5 different kb ic tried.

Same.


001:  D:\PC\BIOS\KBC ROM\KB9012\QCLA4 LA-8861P.BIN
002:  File loading OK. Checksum: 16bit_0x91DA,32bit_0x010491DA;
003:  Programming device......
004:  Erase & Write successfully,19.91 seconds elapsed.
005:  Auto verifying...
006:  Device blank checked failure,start address: 0x7DA.
007:  Verified failure,0.108 seconds elapsed.
008:  Write error occurred,Operation was aborted

azerator

Hello.I have the same problem.Verification error.An the opened and written file is not the same that is readed out.


Start verifying chip......
086:  Chip verification error, start position: 0x800.
087:  Start verifying chip......
088:  Chip verification error, start position: 0x800.
089:  Start writing chip......
090:  Elapsed time: 21.52 seconds￡¬average speed of 6092 bytes/sec.
091:  >------------------------------------OK---------------------------------------<
092:  Start verifying chip......
093:  Chip verification error, start position: 0x500.
094:  Start verifying chip......
095:  Chip verification error, start position: 0x500.
096:  Start verifying chip......
097:  Chip verification error, start position: 0x500.
098:  Start blank checking chip......
099:  Chip is not blank, start position: 0x0.


An after different write/read session different verify error.

常国华

楼主你请教季老师啊？？？？？？