TCL MS801机芯 L46E5300 能用网线加串口命令升级主程序吗

lichenglijinjin

我买的RT809F  给 TCL  MS801机芯  机型L46E5300    能用网线加串口命令升级主程序吗  .我弄来弄去也看不到输出命令符出来.但打印信息都打得出来.  读写里面的数据都行呀.不知那里不会弄.请高手指导一下.

dylaj123

NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
Creating 5 MTD partitions on "NAND 128MiB 3,3V 8-bit":
0x00000000-0x00020000 : "NPT"
mtd: Giving out device 0 to NPT
0x00020000-0x00120000 : "BL0"
mtd: Giving out device 1 to BL0
0x00120000-0x00220000 : "BL1"
mtd: Giving out device 2 to BL1
0x00220000-0x07460000 : "UBI"
mtd: Giving out device 3 to UBI
0x07460000-0x08000000 : "NA"
mtd: Giving out device 4 to NA
parse_cmdline_partitions: add_mtd_partitions
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
UBIFS error (pid 1): ubifs_recover_leb: corrupt empty space LEB 46:20480, corruption starts at 3868
UBIFS error (pid 1): ubifs_scanned_corruption: corruption at LEB 46:3868
UBIFS error (pid 1): ubifs_recover_leb: LEB 46 scanning failed
VFS: Cannot open root device "ubi:RFS" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00             128 mtdblock0 (driver?)
1f01            1024 mtdblock1 (driver?)
1f02            1024 mtdblock2 (driver?)
1f03          116992 mtdblock3 (driver?)
1f04           11904 mtdblock4 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

lichenglijinjin

MSTAR     的提示符   没显示有这个    没说明白呀  具体什么弄.

极速之光

请问2楼显示的那些是怎么回事，我修了一台海信网线加串口升级完之后也显示和你一样的信息，升级不成功。特别是最下面那几行带？号的不知什么意思，哪位老师解释一下

xxjgl

想出现MSTAR很简单，但是你得有厂家的串口烧写文件和具体操作教程，如果没有就不要搞，搞死再搞活就难了