2022-8-20, 12:7:39
COM4, BaudRate:115200 bps, RXD: VGA->12,TXD: VGA->15, Printed by RT809H:
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IIFFO CUU3 rrppaiin fr E33exxtttto eccrrewwordd
NNFO CU13 exxtimmae dddress 0xddf00164
NNO:: CUU Neext mmaee spr 011d
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][785]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][955]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hisense>>AC on
no eeprom
FactoryMode is 0
Not in Factory Mode
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hisense>>AC on
No Reboot Flag, string is
no eeprom
FactoryMode is 0
Not in Factory Mode
no eeprom
ToFacMode is 0
ToFacMode is U
[Mboot][Check_Standby] factory_poweron_mode is secondary
mmc change mount : tvconfig
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
Loading file "/config/PM.bin" at offset 0x0 from mmc device 0 partition tvconfig
24575 bytes read
Wait for PM51 standby...........PM51 run ok...........[Mboot][LED] his_led_type = [3] !!
[Mboot][LED] HIS_LED_REDBLUE_MODE
[Mboot][LED] Red ON!
[Mboot][Standby] KeyPad Init Finished!
==== Enter Standby Mode !! ==== 1
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IIFFO: CUU3 Prepriin fr E33exxtt tossecueewoorl
IFF: CPU2 eett mmage dddrsss 0x3df0016
INF: CP1 Nex iimage ppsr x1133
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][785]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][955]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1266]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1283]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1347]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1423]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][1814]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][1880]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2047]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU3 Preparing for EL3 exit to normal world
INFO: Kernel CPU2 Next image address = 0x202802c0
INFO: Kernel CPU1 Next image spsr = 0x3c9
[ 0.380000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.430000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.430000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.440000] [KDEBUGD] enter : _MStar
[ 0.440000]
[ 0.450000] [AT][KR][start init][2491]
[ 0.450000] [AutoTest][Kernel][start Initprocess][2491]
[ 0.550000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.590000] init: /init.rc: 631: invalid option 'setprop'
[ 0.600000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.800000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.810000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.810000] [KDEBUGD] enter : _MStar
[ 0.810000]
[ 0.820000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.820000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.830000] [KDEBUGD] enter : _MStar
[ 0.830000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IINOO: CPPU Prppainn oorEEL eitt oo eecueewwolld
INNFO: CCU12 Nxxtiimgge address== x33d00066
NFF:: CCP1 Nxtt maage pps =001dd
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1650]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2041]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2107]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2274]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU3 Preparing for EL3 exit to normal world
INFO: Kernel CPU1 Next image address = 0x202802c0
INFO: Kernel CPU3 Next image spsr = 0x3c9
[ 0.360000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.410000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.410000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.420000] [KDEBUGD] enter : _MStar
[ 0.420000]
[ 0.420000] [AT][KR][start init][2714]
[ 0.430000] [AutoTest][Kernel][start Initprocess][2714]
[ 0.550000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.590000] init: /init.rc: 631: invalid option 'setprop'
[ 0.600000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.800000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.810000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.810000] [KDEBUGD] enter : _MStar
[ 0.810000]
[ 0.820000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.820000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.830000] [KDEBUGD] enter : _MStar
[ 0.830000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IINOO: PUU2Prrpprrnng forEEL eeitttto seuure oord
NFFO: CCP1 Net imag aaddrsss== 0xddf00144
IFFO: CPU2Neett imae sprr = 011d
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1650]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2041]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2107]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2274]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU3 Preparing for EL3 exit to normal world
INFO: Kernel CPU3 Next image address = 0x202802c0
INFO: Kernel CPU3 Next image spsr = 0x3c9
[ 0.360000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.410000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.420000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.420000] [KDEBUGD] enter : _MStar
[ 0.420000]
[ 0.430000] [AT][KR][start init][2716]
[ 0.430000] [AutoTest][Kernel][start Initprocess][2716]
[ 0.560000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.600000] init: /init.rc: 631: invalid option 'setprop'
[ 0.610000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.810000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.820000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.820000] [KDEBUGD] enter : _MStar
[ 0.820000]
[ 0.830000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.830000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.840000] [KDEBUGD] enter : _MStar
[ 0.840000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
INNFO: CCPU Prpaarigg frr LL3eext oo scuur wolld
INOO PUU2Neet iaage dddrsss =00xddf0016
IFFO CCPU2Neex imae spsr== 01dd
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1650]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2039]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2105]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2272]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU3 Preparing for EL3 exit to normal world
INFO: Kernel CPU1 Next image address = 0x202802c0
INFO: Kernel CPU3 Next image spsr = 0x3c9
[ 0.360000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.410000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.410000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.420000] [KDEBUGD] enter : _MStar
[ 0.420000]
[ 0.420000] [AT][KR][start init][2712]
[ 0.430000] [AutoTest][Kernel][start Initprocess][2712]
[ 0.510000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.550000] init: /init.rc: 631: invalid option 'setprop'
[ 0.560000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.760000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.770000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.770000] [KDEBUGD] enter : _MStar
[ 0.770000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IINOO: CCPU3 reepainng frr E3 exit t scuuee wrrl
NNFO: CCUU2NNex imae adrrsss== 033d000664
INF: CCPU3Neettiimaeespps =00x1d3
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1650]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2040]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2106]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2273]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU3 Preparing for EL3 exit to normal world
INFO: Kernel CPU2 Next image address = 0x202802c0
INFO: Kernel CPU2 Next image spsr = 0x3c9
[ 0.360000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.410000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.410000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.420000] [KDEBUGD] enter : _MStar
[ 0.420000]
[ 0.420000] [AT][KR][start init][2713]
[ 0.430000] [AutoTest][Kernel][start Initprocess][2713]
[ 0.510000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.550000] init: /init.rc: 631: invalid option 'setprop'
[ 0.560000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.760000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.770000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.770000] [KDEBUGD] enter : _MStar
[ 0.770000]
[ 0.780000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.780000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.790000] [KDEBUGD] enter : _MStar
[ 0.790000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IIFFO CP13 Preparingforr EL3 extt oo eccur worl
IINF: CU13 Nxxt imae dddress =00x3df0114
NFFO PPU Nxx iimggessssr 011d
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1650]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2039]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2105]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2272]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU2 Preparing for EL3 exit to normal world
INFO: Kernel CPU1 Next image address = 0x202802c0
INFO: Kernel CPU1 Next image spsr = 0x3c9
[ 0.380000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.420000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.430000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.440000] [KDEBUGD] enter : _MStar
[ 0.440000]
[ 0.440000] [AT][KR][start init][2713]
[ 0.440000] [AutoTest][Kernel][start Initprocess][2713]
[ 0.530000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.570000] init: /init.rc: 631: invalid option 'setprop'
[ 0.580000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.780000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.790000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.790000] [KDEBUGD] enter : _MStar
[ 0.790000]
[ 0.800000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.800000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.810000] [KDEBUGD] enter : _MStar
[ 0.810000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IIFFO CUU rreaainng forEEL3 exit to scuue wrlld
INFO CUU2 eext imgeeaadrres =0033f00066
IIFFO: CPP12 Nextiimag ssps =00x1d3
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1650]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2040]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2106]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2273]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU1 Preparing for EL3 exit to normal world
INFO: Kernel CPU1 Next image address = 0x202802c0
INFO: Kernel CPU2 Next image spsr = 0x3c9
[ 0.380000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.430000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.430000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.440000] [KDEBUGD] enter : _MStar
[ 0.440000]
[ 0.440000] [AT][KR][start init][2715]
[ 0.450000] [AutoTest][Kernel][start Initprocess][2715]
[ 0.520000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.560000] init: /init.rc: 631: invalid option 'setprop'
[ 0.570000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.770000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.780000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.780000] [KDEBUGD] enter : _MStar
[ 0.780000]
[ 0.790000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.790000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.800000] [KDEBUGD] enter : _MStar
[ 0.800000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IINOO: PUU2PPrpprrigg fr LL3eexttttossecurewoordd
INF:: PPU NNxttiimageaadrress =0033df0164
INF:: CCPU3 eext mmaee pss == xx1d3
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1650]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2040]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2106]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2272]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU2 Preparing for EL3 exit to normal world
INFO: Kernel CPU3 Next image address = 0x202802c0
INFO: Kernel CPU3 Next image spsr = 0x3c9
[ 0.360000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.410000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.410000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.420000] [KDEBUGD] enter : _MStar
[ 0.420000]
[ 0.420000] [AT][KR][start init][2713]
[ 0.430000] [AutoTest][Kernel][start Initprocess][2713]
[ 0.560000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.600000] init: /init.rc: 631: invalid option 'setprop'
[ 0.610000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.810000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.820000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.820000] [KDEBUGD] enter : _MStar
[ 0.820000]
[ 0.830000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.830000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.840000] [KDEBUGD] enter : _MStar
[ 0.840000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IIFFO: CP1 Prearrig oor L33 eitt oo eecrre wrrd
IFOO: PPU Neex iaag adrres = 033f00016
INFO: CPU2 exxt image pprr 011d3
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1650]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2039]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2105]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2272]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU3 Preparing for EL3 exit to normal world
INFO: Kernel CPU1 Next image address = 0x202802c0
INFO: Kernel CPU2 Next image spsr = 0x3c9
[ 0.360000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.410000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.410000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.420000] [KDEBUGD] enter : _MStar
[ 0.420000]
[ 0.420000] [AT][KR][start init][2712]
[ 0.430000] [AutoTest][Kernel][start Initprocess][2712]
[ 0.510000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.550000] init: /init.rc: 631: invalid option 'setprop'
[ 0.560000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.770000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.770000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.780000] [KDEBUGD] enter : _MStar
[ 0.780000]
[ 0.780000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.790000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.790000] [KDEBUGD] enter : _MStar
[ 0.790000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IINF:: CP1 Pepprrigg for E33 xxtt oo seurrewworld
IFOO: CPU2NNxxt mmage addees =0x33df0166
IFOO CP13 exx imggessprr =0xx1d3
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu opencreate instance at 2B4F3D20 with private size 80 bytes at 2B4F3D68
create instance at 2B4F3DC0 with private size 52 bytes at 2B4F3E08
create instance at 2B4F3E40 with private size 52 bytes at 2B4F3E88
uboot held at [2B2DDF60~2C500000],size=012220A0
CPU : << MStar >>#
Board: BD_MST123B_10A_MOONEY
DRAM: 197 MiB
Now running in RAM - U-Boot at: 2BB00000
eMMC: HS400 200MHz
eMMC 7.28 GB [E8FFF8h]
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 20%-30% device life time used
eMMC pre_eol_info normal
In: serial
Out: serial
Err: serial
Net: No ethernet found.
no eeprom
0x8 0xBA 0x5F 0xF4 0x52 0x87
MACaddr = 0x80xBA0x5F0xF40x520x87
the same ethaddr!
MAC: 0x8: 0xBA: 0x5F: 0xF4:0x52: 0x87
[CPU INFO] cpu opencreate instance at 2B5042F8 with private size 44 bytes at 2B504340
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: ????? ?`???xV4
[AT][MBoot][Driver Init][1182]
Changelist: 24543697
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
hs>>DC on
fore uup IRKey [0xFF] repeatflag [0x2D]
Boot Check: BootMode = 1 --------
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
hs>>DC on
create instance at 2B505298 with private size 384 bytes at 2B5052E0
[0;31m[ERROR] MsDrv_PNL_Init:1083: [0mVB1 Link Type NA !!!!
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = 1F200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1F000000
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1FA00000
LINK TYPE = EXT [_MDrv_PNL_Init_LPLL][438]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_LPLL][440]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][490]pstPanelInitData->u16Width=3840, pstPanelInitData->u16Height=2160
[_MDrv_PNL_Init_Output_Dclk][492]u16HTotal=4400,u16VTotal=2260,pstPanelInitData->u16HTotal=4400,pstPanelInitData->u16VTotal=2260, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 2560]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM0Init PWM1Init PWM2mboot:: u16PwmRstAttrFlag = 0
create instance at 2B505468 with private size 1856 bytes at 2B5054B0
[XC,Version][0;36m
[mTCON VERSION 1
[panel_dinit][755] u16Panel_SwingLevel=80
[AT][MB][panel_pre_init][1493]
[inner_tcon_init][430] enter
[TCON] PMU OK
[TCON] Gamma OK
[inner_tcon_init][442] leave
[AT][MB][bootlogo begin][1510]
nuc: HS_LogoSelect Enter, line = 518
nuc: logo_cmd = NULL, line = 523
nuc: logo_state = NULL, show default logo, line = 527
nuc: HS_LoadDefaultLogo Enter, line = 227
nuc: HS_LogoSelect Out, Ret = 0, line = 566
JPD_InputADDR 726889392 ,724423128
create instance at 2B5367A0 with private size 312 bytes at 2B5367E8
[AT][MB][JPD Decode][1574]
g_state is 5
[showLogo] GOP Boot Logo Index 2
create instance at 2B536928 with private size 1728 bytes at 2B504768
[GOP INFO] gop opencreate instance at 2B504E30 with private size 9596 bytes at 2B505BF8
[_GOP_RegisterAllCBFunc][5606] fpSetFBFmt is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5658] fpEventNotify is NULL.(If on STR state, this is a normal message)
[_GOP_RegisterAllCBFunc][5672] fpXCSetDwinInfo is NULL.(If on STR state, this is a normal message)
<<set_mirror H ON!!>>
[AT][MB][Show Logo][1651]
##Wakeup Source 5
[Mboot][Wakeup Source] System is wake up by SAR!!
[AT][MBoot][Boot Nuttx][2040]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 15742736 Bytes = 15 MiB
Load Address: 20280000
Entry Point: 20280000
Contents:
Image 0: 13337896 Bytes = 12.7 MiB
Image 1: 2404828 Bytes = 2.3 MiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
ramdisk start = 0x25CB8574, ramdisk end = 0x25F03750
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2106]
Starting kernel ...
set 64 bit mode
armfw_real_va_addr : 5EBE3000
optee_real_va_addr : 5EE00000
[0;32;31m [Ian] ARM_FW_Enter_64 259 ARMv8 NS-Uboot for 64bit kernel[m
[0;32;31m [Ian] ARM_FW_Enter_64 260 25CB8574 24B1DC 20200100[m
INFO: CPU0 Preparing for EL3 exit to normal world
INFO: CPU0 Next image address = 0x20280000
INFO: CPU0 Next image spsr = 0x3c9
INFO: [0;32;31m [Ian] mstar_primary_kernel_enter 128 2b2dc3a4 20200100 25cb8574 24b1dc[m
[ 0.000000] SAR5=ON
[ 0.000000] SAR5=ON[ 0.000000] [AT][KR][reset timer][2273]
[ 0.000000] thread_info_cache_init, alloc 1536 thread_pool
INFO: Kernel CPU1 Preparing for EL3 exit to normal world
INFO: Kernel CPU1 Next image address = 0x202802c0
INFO: Kernel CPU1 Next image spsr = 0x3c9
[ 0.370000] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.420000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.420000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.430000] [KDEBUGD] enter : _MStar
[ 0.430000]
[ 0.430000] [AT][KR][start init][2707]
[ 0.440000] [AutoTest][Kernel][start Initprocess][2707]
[ 0.550000] init: property_set("ro.boot.selinux", "permissive") failed
[ 0.590000] init: /init.rc: 631: invalid option 'setprop'
[ 0.600000] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 0.800000] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 0.810000] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 0.810000] [KDEBUGD] enter : _MStar
[ 0.810000]
UART_115200
AC_ON
MIU0_DQS-OK
BIST0-OK
BIST1-OK
#_m
armfwNOTICE: BL3-1: v1.1(debug):e9dbd72
NOTICE: BL3-1: Built : 14:07:05, Mar 18 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE: [Ian] opteed_synchronous_sp_entry 103 20103750
IINFO: CCP13PPrpaarigg frr LL3 xxt t seuueewworl
IFF:: CCP1 Next mmae adrress== 0x3d000644
NNFO: PPU Next iaage pss == 0x1d3
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x201009bc
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 74e87206b191b34d
INFO: R2 8dfdb00d0d333f2c
INFO: R3 fcaf8b5251464f28
U
Relocation Offset is: 01700000
hs>>power-on
[AT][MB][start ub][1012]
U-Boot 2011.06-00584-ga763002-dirty (Jan 16 2020 - 02:13:21)
msIR_Initialize
[35mFunction = SYSOpen, Line = 1071, current resource pri_shm content is: 0[m
[35mFunction = SYSOpen, Line = 1090, [SYS INFO] OPEN INSTANCE...[m
create instance at 2B4F3C50 with private size 128 bytes at 2B4F3C98
[MIU INFO] miu |
| 
| 
|||iFix 爱修网
( 粤ICP备2021135374号 )
Deutsch
English
Français
繁體中文
发表于: 2022-8-20 12:17:57
楼主
qj711 
2022-8-20 13:17
有可能 也有可能是灰屏